Posted by
Amit S
comments (1)
In today's times, there are hardly any construction or manufacturing project which can be completed without the use of stainless steel sheets. The reason is quite simple, stainless steel sheets have high tensile strength, better durability and delivers a great finish. The best part about using them is low maintenance which has positioned it as a superior alternative to traditional steel.
Buyers usually keep three main factors in mind while deciding to buy stainless steel sheets. The first and foremost is - grade, then size and finally the overall finish.
The three most common stainless steel grades available are 304, 316, and 410. Experts say that Grade 304 is the most common of the above mentioned grades. It offers good corrosion resistance while maintaining its core quality and durability intact. It can also be noted that grade 303 is not available in the sheet form.
The thickness of stainless steel sheets is normally between 0.4mm and 2.5mm. In case someone has a requirement of any proportion less than this, then, they are probably referring to a foil, on the other hand any requirement of more than 3mm and above qualifies for a plate.
As far as the finish is concerned, the sheet produced is first rolled into the required size and thickness and then made to pass through highly polished rollers before a final finish is delivered.
The finishing process involved is somewhat complicated and there are dozens of patterns available in the market.
The most common finish is brushed finish which delivers a pattern of very fine lines made up of small scratches appearing in a unidirectional way. Another one is satin finish where in scratch-brushing is used to produce a soft sheen. Last but not the least, the mirror polishing gives the sheet a highly polished reflective surface.
Overall the stainless steel sheets are in great demand due to rapid western style urbanization.
Many manufacturers prefer these sheets over other material as they consider it as a perfect fit for anything from resurfacing counter tops, or appliances, or for a complete makeover of a structure.
As competition is getting getting more intense, most of the stainless steel sheets suppliers and manufactures are coming online in an effort to trade through B2b portals. Online marketing gives them better exposure especially to the overseas market at a fraction of a cost. Overall the stainless steel sheets suppliers are all set for a better performance in the next financial year.
PS: If you are a Stainless Steel Sheets supplier, get your online catalog today and make profits by tapping the business queries being generated across the globe on the web 24/7.
Buyers usually keep three main factors in mind while deciding to buy stainless steel sheets. The first and foremost is - grade, then size and finally the overall finish.
The three most common stainless steel grades available are 304, 316, and 410. Experts say that Grade 304 is the most common of the above mentioned grades. It offers good corrosion resistance while maintaining its core quality and durability intact. It can also be noted that grade 303 is not available in the sheet form.
The thickness of stainless steel sheets is normally between 0.4mm and 2.5mm. In case someone has a requirement of any proportion less than this, then, they are probably referring to a foil, on the other hand any requirement of more than 3mm and above qualifies for a plate.
As far as the finish is concerned, the sheet produced is first rolled into the required size and thickness and then made to pass through highly polished rollers before a final finish is delivered.
The finishing process involved is somewhat complicated and there are dozens of patterns available in the market.
The most common finish is brushed finish which delivers a pattern of very fine lines made up of small scratches appearing in a unidirectional way. Another one is satin finish where in scratch-brushing is used to produce a soft sheen. Last but not the least, the mirror polishing gives the sheet a highly polished reflective surface.
Overall the stainless steel sheets are in great demand due to rapid western style urbanization.
Many manufacturers prefer these sheets over other material as they consider it as a perfect fit for anything from resurfacing counter tops, or appliances, or for a complete makeover of a structure.
As competition is getting getting more intense, most of the stainless steel sheets suppliers and manufactures are coming online in an effort to trade through B2b portals. Online marketing gives them better exposure especially to the overseas market at a fraction of a cost. Overall the stainless steel sheets suppliers are all set for a better performance in the next financial year.
PS: If you are a Stainless Steel Sheets supplier, get your online catalog today and make profits by tapping the business queries being generated across the globe on the web 24/7.
Posted by
Amit S
comments (3)
India and incense sticks share an age old relationship. India is a religious country and there are hardly ever any festival or religious occasions celebrated without the use of incense sticks.
Incense sticks are made up of aromatic plants (dried up leaves mixed with essential oils) which releases fragrance when burned. It is mostly used in religious ceremonies/rituals, aromatic therapies and meditational purposes. They are also used for creating spiritual ambience and to remove bad odour. Historians suggest that incense may have originated in ancient Egypt, where in they were used while burying the mummies or on other religious gatherings.
Different countries have different ways to make incense sticks (it usually differs as per their culture). They can broadly be divided between direct burning and indirect burning incense. Indirect-burning incense does not burn on its own and requires a separate heat source. On the other hand, direct-burning incense can be lit directly by a flame and then fanned down which later on releases fragrance.
Indian incense sticks can be further be classified into two categories: masala and charcoal. Masala incense is made up of the mixture of several solid scented ingredients, turned into a paste and then rolled over a bamboo core stick, whereas, charcoal incense is made by dipping an unscented blank stick into a mixture of perfumes or aromatic oils.
Unfortunately, most of the incense sticks produced in India don't meet the correct quality parameters and are consumed domestically. The one which are exported, are of comparatively better quality because of stringent quality levels and intense competitiveness abroad.
Even though the incense sticks industry gives a means of livelihood to lakhs of rural people, especially the women that too in the tribal areas, this industry is yet to make itself count as an important contributor to our GDP.
Recently, there were some reports that incense sticks can cause cancer. Health officials warned that lighting incense sticks, sometimes emits cancer causing toxins which is almost as deadly as cigarette smoke or traffic fumes. The veracity of this claim remains to be challenged, before it is acknowledged worldwide.
Overall, the incense sticks industry is expected to perform well in the times to come, capable of knocking down every challenge whatsoever comes in their way.
PS: If you are an incense sticks suppliers, get your online catalog today and make profits by tapping the business queries being generated across the globe on the web 24/7.
Incense sticks are made up of aromatic plants (dried up leaves mixed with essential oils) which releases fragrance when burned. It is mostly used in religious ceremonies/rituals, aromatic therapies and meditational purposes. They are also used for creating spiritual ambience and to remove bad odour. Historians suggest that incense may have originated in ancient Egypt, where in they were used while burying the mummies or on other religious gatherings.
Different countries have different ways to make incense sticks (it usually differs as per their culture). They can broadly be divided between direct burning and indirect burning incense. Indirect-burning incense does not burn on its own and requires a separate heat source. On the other hand, direct-burning incense can be lit directly by a flame and then fanned down which later on releases fragrance.
Indian incense sticks can be further be classified into two categories: masala and charcoal. Masala incense is made up of the mixture of several solid scented ingredients, turned into a paste and then rolled over a bamboo core stick, whereas, charcoal incense is made by dipping an unscented blank stick into a mixture of perfumes or aromatic oils.
Unfortunately, most of the incense sticks produced in India don't meet the correct quality parameters and are consumed domestically. The one which are exported, are of comparatively better quality because of stringent quality levels and intense competitiveness abroad.
Even though the incense sticks industry gives a means of livelihood to lakhs of rural people, especially the women that too in the tribal areas, this industry is yet to make itself count as an important contributor to our GDP.
Recently, there were some reports that incense sticks can cause cancer. Health officials warned that lighting incense sticks, sometimes emits cancer causing toxins which is almost as deadly as cigarette smoke or traffic fumes. The veracity of this claim remains to be challenged, before it is acknowledged worldwide.
Overall, the incense sticks industry is expected to perform well in the times to come, capable of knocking down every challenge whatsoever comes in their way.
PS: If you are an incense sticks suppliers, get your online catalog today and make profits by tapping the business queries being generated across the globe on the web 24/7.
Posted by
Amit S
comments (0)
Rotogravure, more commonly known as roto or gravure among printing industry professionals is a process of printing which involves engraving or transferring an image onto an image carrier with the help of an rotational printing press. Rotary gravure presses are known to be the the fastest and widest presses in operational in modern times, capable of printing almost everything, right from narrow labels to wide rolls of vinyl flooring.
The Process of Rotogravure
This modern type of intaglio printing utilizes copper coated cylinders as the image carriers, on which the desired image is embossed as a collection of small cells. The cylinders are then made to rotate in an ink fountain to let the cells absorbs all the ink that it can. The excess ink is generally eliminated or being scraped from the non-image areas by employing a blade made of steel, rubber or plastic which is called the doctor blade. Webs of paper are made to pass between the cylinder and a rubber-coated impression roller and the ink is transferred by a combination of capillary action and the pressure of the substrate into the engraved cells of the cylinder, helped by the rubber surface of the impression roller.
In Rotogravure Printing Machinery, there are usually three methods of photoengraving that are used to engrave gravure cylinders, where the cell open size or the depth of cells can be uniform or variable.
They are:
1.Conventional with uniform cell size and variable cell depth
2."Two positive" or "Lateral hard dot" with variable cell size and variable cell depth
3.Direct transfer with variable cell size and uniform cell depth.
A wide variety of operations are involved in Rotogravure printing processes such as saddle stitching facilities for magazine and brochure work which may be in-lined with Rotogravure printing process. This process requires efficient Rotogravure Printing machinery as it is widely used for commercial printing of magazines, postcards, and corrugated (cardboard) product packaging.
Enlisted below are a few key features which are generally associated for effluent functioning of the entire Rotogravure printing process :
1.Highly efficient machines featuring options of front & reverse printing facility.
2.The machine should be designed & constructed to meet high standards of flexible printing
3.The drying system of the Rotogravure Printing Machinery should be designed to match highspeed printing by providing hot air dryers with heaters & blowers.
4.The machine should be provided with compact web path, high performance & low waste.
5.The machine should be provided with double job facility at a time with optional & additional arrangement.
The Process of Rotogravure
This modern type of intaglio printing utilizes copper coated cylinders as the image carriers, on which the desired image is embossed as a collection of small cells. The cylinders are then made to rotate in an ink fountain to let the cells absorbs all the ink that it can. The excess ink is generally eliminated or being scraped from the non-image areas by employing a blade made of steel, rubber or plastic which is called the doctor blade. Webs of paper are made to pass between the cylinder and a rubber-coated impression roller and the ink is transferred by a combination of capillary action and the pressure of the substrate into the engraved cells of the cylinder, helped by the rubber surface of the impression roller.
In Rotogravure Printing Machinery, there are usually three methods of photoengraving that are used to engrave gravure cylinders, where the cell open size or the depth of cells can be uniform or variable.
They are:
1.Conventional with uniform cell size and variable cell depth
2."Two positive" or "Lateral hard dot" with variable cell size and variable cell depth
3.Direct transfer with variable cell size and uniform cell depth.
A wide variety of operations are involved in Rotogravure printing processes such as saddle stitching facilities for magazine and brochure work which may be in-lined with Rotogravure printing process. This process requires efficient Rotogravure Printing machinery as it is widely used for commercial printing of magazines, postcards, and corrugated (cardboard) product packaging.
Enlisted below are a few key features which are generally associated for effluent functioning of the entire Rotogravure printing process :
1.Highly efficient machines featuring options of front & reverse printing facility.
2.The machine should be designed & constructed to meet high standards of flexible printing
3.The drying system of the Rotogravure Printing Machinery should be designed to match highspeed printing by providing hot air dryers with heaters & blowers.
4.The machine should be provided with compact web path, high performance & low waste.
5.The machine should be provided with double job facility at a time with optional & additional arrangement.
Posts
